#Plate Beveling Machine

[projeects]

[insertcleverusername101]

Borderline insane technical ramble ahead. Might be entertaining. Might be informative. Might just be nonsense. Beware.

I fucking love the Dell Optiplex line.

One of my oddities is that I collect computers like no one's business. I've got like 20 of the things.

Recently, one of my fleet, an HP consumer grade computer died. I'm not too broken up about this (or any computer's death, if I'm being honest), since I was able to pull the drives, there was nothing important on it, and it was an HP, which sucks ass.

I was able to replace it with a new guy: A Dell Optiplex 990.

Now, these little bastards are everywhere. They've looked almost identical for the better part of 15 years, too. They're so ubiquitous that no matter who you are or where you are, you're almost guaranteed to have seen an Optiplex line computer at some point.

Dell Optiplex computers are a standard machine in almost any workplace, from factories to hospitals & research facilities. They're aimed at commercial and industrial use, so most workplaces have them somewhere.

Many of them have also made it into the consumer market, since when companies need to upgrade their fleets, they will often auction off the old computers. Companies will reimage them, then sell them as cheap refurbs, at which point they'll keep chugging along. Some of the oldest of their most iconic design, the black box with the silver grey front bevel plate, are coming up on 20 years, and can still be found occasionally in service in distant corners.

Begs the question though: Why are there so many of them? There are a lot of commercial manufacturers of hardware. Almost all the computer brands that you're probably familiar with make commercial hardware.

The answer is simple. They're good computers. Things like hard drives and the RAM can be swapped and upgraded without tools, making them dead simple to service. They don't really have the same firmware problems other manufacturers do (cough HP cough), so you won't see performance falloffs or stability problems.

They're not really obnoxious pieces of hardware either. They're not loud, brightly colored, or large. The SFF and USFF computers are super densely packed, but still have solid hardware inside. They can just sit in a dark corner until they're needed, quietly humming away. Since their cases are so plain, they're not really a distraction, they're just kind of... there.

Really, they're what a computer should be. Easy to maintain for anyone, reliable, and nondescript.

[k00284801]

Research Project.

Exploring new methods of print making – Electro etching  

Electronic etching is a type of printing that alongside engraving comes under the category of Intaglio. Images printed (etchings) by this process are the results of ink being forced out of the incised lines etched in a copper plate employing a heavy press. This leads to slightly raised ink on the paper and a characteristic plate mark showing the sides of the plate. 

Electronic etching is a somewhat complicated form of print making. To begin to make a print this way you start with a copper plate. Firstly, you need your copper plate clean and ready to begin. Do this by using a cork to wipe down the copper plate with chalk powder and methylated spirits in a circular motion. Wash off this solution with water. Once the copper plate is dry it needs to be polish with Brasso polish and then it is prepped and ready for the electro etching process.  

Then begin etching as normal with an etching tool as you would any other regular etching process. Once you have finished etching your lines into your copper plate cover the back of the plate in tape.  

Now you are ready to submerge your copper plate into an electro etching machine. The copper frame will send out an electric currency as well as the electrically conductive solution (sulfate copper). Leave the copper plate in the solution for 20 minutes and the electro etching machine will ‘bite’ into your lines.  

Rinse the plate of the solution and dry your plate. Once your plate is dry and clean bevel (change (a square edge on an object) to a sloping one) the edges as to ensure that your plate does cut or damage your paper when printing.  

Apply ink to your copper plate generously and then remove from the surface using a cloth. Finish off removing the excess ink with some newsprint in a circular motion. (Similar to the process carried out when creating an etching of any kind, on acetate for one) 

Finally, roll your copper plate and paper through the printing press to create your final print.  

[promotechindiasworld]

The BM-21 is a revolutionary new portable beveling machine that is perfect for machining plates and pipes before welding. It has a single milling head equipped with 10 square inserts, making the machining process more efficient and requiring less effort from the operator. The inserts can be exchanged quickly and easily without needing any special adjustments. The BM-21 has an extended working range from 0 to 60 degrees, making it ideal for a variety of projects. With its durable construction, it is sure to last for years to come. The BM-21 is a great tool for any welder and is sure to make their job easier and more efficient. . Visit our website to know more about us - https://promotech-india.in/ .

[merakistar]

A350lf2 flanges in UAE

A350 LF2 flanges are designed for low-temperature packages. those flanges are made from carbon metal or low-alloy steels. There are forms of A350 LF2 flanges: magnificence 1 and class 2. each sorts undergo effect finding out to make certain they meet the required durability necessities for low-temperature average overall performance. The ASTM A350 LF2 flanges are available diverse shapes, sizes, specs, and grades, and we're a manufacturer and dealer of these sort of different sorts. With years of enjoy inside the enterprise, we produce a wide sort of flanges in more than one fabric grades.

The ASTM A350 LF2 artificial flanges are stronger due to the fact they will be made from a single piece of metal, making them perfect for programs wherein energy is important. you can purchase A350 LF2 magnificence 1 flanges right away from the manufacturers in Dubai. these flanges also can be without issue welded into piping systems. For programs that require superior sturdiness and hardenability, ASME A350 LF2 flanges are the preferred desire. In some programs, killed carbon products are required. to meet the ones needs, we provide A350 LF2 killed carbon metal flanges.

We provide flanges in numerous sizes and grades, as in line with your unique necessities. Please do not hesitate to touch us for similarly data or to inquire approximately our products. All forgings supplied by the usage of the SA 350 Gr LF2 Cl1 flanges manufacturer are generally ultrasonically examined for great assure.

Specification Chart for ASTM A350 LF2 Flanges

Size Range:

1/2″ to 48″

(15 NB) to (1200 NB)

Pressure Rating Chart (ANSI):

300 LBS, 150 LBS, 600 LBS, 900 LBS, 2500 LBS, 1500 LBS

DIN Pressure Calculation:

40 Bar, 16 Bar, 25 Bar, 6 Bar, 10 Bar

PN10, PN25, PN64, PN16, PN6, PN40

JIS Pressure Rating:

20 K, 10 K, 40 K, 16 K, 5 K, 30 K, 63 K

Manufactured According to Standards:

UNI, BS, AS2129, ANSI, DIN, GOST, JIS, SABS, NFE, AWWA, EN, etc.

Testing Methods:

X-ray detector

Ultrasonic flaw detector

Direct-reading spectrograph

Magnetic particle detector

Hydrostatic testing machine

Coatings Available:

Zinc Plated

Yellow Transparent

Cold and Hot Dip Galvanized

Anti-rust Paint

Oil Black Paint

Common Types of Flanges:

Threaded

Screwed

Forged

Plate

Equipment Used in Manufacturing:

Press machine

Bending machine

Sand-blasting machine

Pushing machine

Electric bevelling machine

UNI / EN Pressure Ratings:

16 Bar, 6 Bar, 10 Bar, 40 Bar, 25 Bar

Connection Type / Flange Face Type:

RF (Raised Face)

Small Tongue

RTJ (Ring Type Joint)

FF (Flat Face)

LJF (Lap Joint Flange)

Large Tongue & Groove

Origin:

Western Europe

Japan

India

USA

Korea

Applicable Standards:

API 7S-43

API 605

ISO 70051

JIS B2220

API 7S-15

ANSI/ASME B16.5

BS 4504

BS 10

EN 1092

DIN

B16.47 Series A & B

MSS S44

BS 1560-3.1

B16.48

EN 1092

This specification chart provides a comprehensive overview of the available options, standards, pressure ratings, and testing methods for ASTM A350 LF2 flanges, ensuring compatibility across a wide range of applications. For more detailed inquiries or specific requirements, please feel free to reach out.

[kmbtpvtltd]

Supplier of Industrial Flange in Karnataka

Company Overview: Keshar Bhawani Metal & Tubes Pvt Ltd is a leading Manufacturer and Supplier of Industrial Flange in Karnataka, India. Industrial flanges are essential components used to connect pipes, valves, pumps, and other equipment in piping systems. They provide a means for joining or terminating pipes, allowing for easy assembly, disassembly, and maintenance of the system. Flanges are typically circular in shape and feature holes for bolting or welding to adjacent components. These flanges come in a variety of shapes, sizes, and materials to suit different applications and operating conditions. Common materials used for industrial flanges include carbon steel, stainless steel, alloy steel, and various non-ferrous metals such as brass and copper. One of the primary functions of industrial flanges is to create a secure and leak-proof connection between pipe sections or components. They achieve this secure connection by bolting or welding the flange to the mating surface of the pipe or equipment. The flange’s design ensures uniform distribution of forces and pressure across the joint, minimizing the risk of leakage or failure. Industrial flanges are widely used in industries such as oil and gas, petrochemical, chemical processing, power generation, water treatment, and manufacturing. Specifications Of Industrial Flanges: Specifications: ASTM A105 / ASME SA105, A105N Dimensions: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Size: 1/2″ to 48″ Material Forms: Stainless Steel, Carbon Steel, Alloy Steel, Duplex & Super Duplex Steel, Titanium, Hastelloy, High Nickel Alloy, etc. Equipment: Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine, etc. Coating: Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized Flanges Keshar Bhawani Metal & Tubes Pvt Ltd is Supplier of Industrial Flange in Karnataka Including Badami, Belagavi, Chamarajanagar, Bhadravati, Bidar, Hassan, Bagalkot, Bidar, Chikkamagaluru, Kalaburagi, Kolar, Ballari, Belagavi, Bangalore, Dakshina Kannada, Haveri, Kodagu, Bengaluru, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Urban, Chitradurga, Vijayapura, Gadag, Tumakuru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Ramanagara, Kittur. For detailed information and inquiries, please feel free to contact us. View Product Read the full article

[universemetal123]

Orifice Flanges Exporters in India

Introduction

Universe Metal & Alloys has extensive experience in manufacturing and supplying all types of pipe fittings. The entire manufacturing process is supported by trained professionals who have extensive experience in handling different types of pipe fittings and other products.

Description

Universe Metal & Alloy stands tall as one of the leading Manufacturers, Suppliers, Stockists, and Exporters of Orifice Flanges in India. With a rich legacy and a commitment to quality, we have carved a niche for ourselves in the competitive metal market. Our dedication to Suppliers to international and national quality standards sets us apart, making us a trusted name in the industry.

At Universe Metal & Alloy, we take pride in our Stainless Steel Orifice Flanges, which are meticulously designed and developed to meet the diverse needs of various industries. Crafted with precision and excellence, our ASTM A182 Stainless Steel Orifice Flanges are renowned for their durability and reliability, making them ideal for a wide range of piping applications across sectors such as Chemical, Petrochemical, Building, Construction, and more.

Benefits:

Accuracy and Reliability: Orifice flanges provide precise flow measurement, which is essential for process control and optimization.

Versatility: Suitable for a wide range of applications, including water, oil, gas, and steam.

Cost-Effective: They offer an economical solution for flow measurement, especially in large-scale industrial applications.

Durability: Made from robust materials, these flanges can withstand harsh operating conditions, ensuring long-term performance.

Ease of Installation and Maintenance: Orifice flanges are designed for easy integration into existing piping systems and require minimal maintenance.

Specification:

ASME B16.5 Orifice Flange Size Chart1/2" (15 NB) to 48" (1200NB) DN10~DN5000grooved Orifice flange StandardsANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092Spectacle Flange Pressure Rating ANSIClass 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Spectacle FlangeSpectacle Flange Pressure Calculation in DIN6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Spectacle FlangeJIS5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Spectacle FlangeUNI6Bar 10Bar 16Bar 25Bar 40Bar grooved Orifice flangeEN6Bar 10Bar 16Bar 25Bar 40Bar Forged grooved Orifice flangeCoatingOil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized ASME B16.5 Orifice FlangeMost common types of Orifice FlangeForged / Threaded / Screwed / PlateTest CertificatesEN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etcProduction technique

Forged, Heat treated and machined

Connect Type/ Flange Face TypeRaised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, GrooveSpecial designAs per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2″) to 200 NB (8″) Equal and Reducing ConfigurationsTestDirect-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detectorEquipmentPress machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etcOriginIndian / West Europe / Japan / USA / KoreanManufacturer of

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. Spectacle Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

B.S: BS4504 , BS3293, BS1560, BS10

AS 2129: Table D; Table E; Table H

ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48

ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

American standard (ANSI)

German (DIN)

British standard (BS)

DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 Forged grooved Orifice flange

The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276

grooved Orifice flange Uses & application

Bitumen upgraders.

Heavy oil refineries.

Nuclear power (mostly seamless).

Petrochemicals and acids.

Export toIreland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc

Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Product Overview:

At Universe Metal & Alloys, our orifice flanges are designed and manufactured to the highest standards. Each product undergoes rigorous quality control to ensure it meets the specific requirements of our clients. Our orifice flanges are suitable for a variety of applications, including chemical processing, petroleum refining, power generation, and water treatment. With a commitment to excellence, we provide detailed product information, technical support, and competitive pricing to meet the needs of our customers.

Conclusion:

Orifice flanges are an indispensable component for accurate flow measurement in industrial piping systems. Universe Metal & Alloys is dedicated to delivering high-quality orifice flanges that meet the exacting standards of various industries.

For more information or to place an order, please contact us at info@universemetal.com or call us at +91-22-66363360 / 66393788.

[midseo]

Magnetic Tool Setting Gauges, Manufacturer, Supplier, Exporter, India

Magnetic Tool Setting Gauges, Manufacturer, Supplier, Exporter, Pune, India, USA, UK, Australia, South Africa, Asia, Darussalam

Magnetic Tool Setting Gauges, Electromagnetic Lifter, Electromagnetic Lifters, Electro Magnetic Lifter, Electro Magnetic Lifters, Magnetic Lifter, Magnetic Lifters, Permanent Magnetic Lifter, Permanent Magnetic Lifters, Electro Permanent Magnetic Lifters, Electro Permanent Magnetic Lifter, Electro Permanent Magnetic Lifters, Lifting Magnet, Lifting Magnets, Electro Magnet, Electro Magnets, Angle Plate, Angle Plates, Magnetic Sweeper, Magnetic Sweepers, Flexible Magnetic Base, VMC Magnet, VMC Magnets, Magnetic Stand, Magnetic Stands, Tool Makers Vice, Tool Makers Vices, Machine Vice, Machine Vices, Gauss Meter, Gauss Meters, Demagnetizer, Demagnetizers, Pickup & Place Magnet, Pickup & Place Magnets, Sheet Separator, Sheet Separators, Electromagnetic Holder, Electromagnetic Holders, Magnetic Stick, Magnetic Sticks, Roller Bearing V Block, Roller Bearing V Blocks, Plate Lifter, Plate Lifters, Support Screw Jack, Support Screw Jacks, Try Square Beveled Edge, Fork Lift Operated Magnetic Sweeper, Fork Lift Operated Magnetic Sweepers, Suspension Magnet, Suspension Magnet, Inspection Instruments, Inspection Instrument, Magnetic Tools, Machine Shop Aids, Ultra - Magnetic V Blocks, Hardened And Ground - V Blocks, V Block With Clamp, Tool - Room V Block, Roller Bearing V Block, Pot Magnet, Button Magnet, Magnetic Holdfast, Parallel Blocks, Support Screw Jack, Right Angle Knee, Magnetic Vice, Precision Grinding Vice, Hardened and Ground Precision Grinding Vice, Screw Type, Sine Vice, Sine Bar, Sine - Table, Compound Sine - Table, Magnets, Magnetic Sine - Table, Magnetic Tool Setting Gauge, Hardened and Ground - Knife - Edge Straight Edge, Steel Straight Edge, Straight Edge, Try - Square, Flat Edge Without Stock, Beveled Edge, Stock Try - Square, Flanged Beam Try - Square, Magnetic Sweeper, Permanent Magnetic Sweeper, Magnetic Sticks, Magnetic Stick.

[shinerise]

Selling points of laser plate and tube all-in-one machine:

It is relatively small in size, has a wide range of applications, and can be processed without molds;

Supports bevel cutting and double chuck clamping, suitable for all kinds of special-shaped pipe fittings;

High integration, long service life, and efficient and energy-saving design can significantly save costs;

It integrates plate cutting and pipe cutting, and can process various metal materials and various pipe fittings and plates;

Fully intelligent CNC system, human-computer exchange operation interface, easy to operate;

Low maintenance cost, simple maintenance and easy to use. Have these advantages impressed you who are reading this?

[synergicweldsolutions]

Multi Torch Flame cutting Machine Manufactures

VP Synergic Weld Solutions Multi Torch Flame Cutting Machine manufacturers is a type of cutting machine designed to cut thick metal plates and sheets with precision and efficiency. It equipped with multiple torches. That can be controlled by Computer Numerical Control (CNC). CNC laser cutting machine system, allowing for automated and precise cutting operations. The multi-torch design enables the CNC laser cutting machine to handle large cutting tasks, making it ideal for cutting metal plates of varying sizes and thicknesses. Top welding machine manufacturer in India.  The machine can also used for straight and bevel cuts, providing versatility and flexibility for a wide range of cutting applications. Our. Are widely used in industries such as shipbuilding, construction, and metal fabrication, providing efficient and cost-effective cutting solutions. The use of our CNC Multi Torch Flame Cutting Machine  results in high quality, consistent cuts, reducing the time and cost associated with manual cutting method

[gallianz]

CLAD PLATE PROCESSING SERVICES

Gallianz is a professional supplier of clad plates. We are proficient in all the production processes. Each details are our advantages. We also offer a range of metal processing services:

Clad Plate Edge Peeling Service, Clad Plate Edge Beveling Service and Clad plate Coiling Service. If you need these special services, please contact and tell your requests.

Different Types Of Clad Plate Processing Services

What Is Clad Plate Processing Service

Clad plate processing service refers to the professional services offered by specialized companies to process clad plates according to customer specifications and requirements. These services involve various techniques and processes to cut, bend, weld, machine, or heat treat clad plates to achieve the desired dimensions, shapes, and properties.

Typically, clad plate suppliers have the expertise, equipment, and facilities to handle clad plates of different materials, thicknesses, and sizes. They work closely with clients to understand their specific needs and provide customized solutions. These companies may have the capabilities to handle complex projects and deliver high-quality clad plates that meet industry and customer standards.

The exact range of services provided by clad plate processing companies may vary but commonly include cutting (sawing, shearing, or plasma cutting), bending (press brake bending or roll bending), welding (TIG, MIG, or laser welding), machining (milling, drilling, or turning), and heat treatment (annealing, normalization, stress relieving).

By outsourcing clad plate processing services to specialized providers, customers can benefit from their expertise, efficient processes, and quality assurance. This allows customers to focus on their core operations while ensuring that they receive accurately processed clad plates that meet their specific needs.

Can Clad Plates Be Bent To Specific Shapes?

Yes, clad plates can be bent to specific shapes. The process of bending clad plates involves deforming the material to achieve the desired curvature or form. Clad plates are typically composed of layers of different metals or alloys bonded together, which can make them more challenging to bend compared to single-metal plates.

When bending clad plates, it is crucial to consider the properties and thicknesses of each layer to ensure that the bending process does not compromise the bond between the layers. The bending process must be carried out carefully to prevent delamination or separation of the clad layers.

Depending on the specific requirements, clad plates can be bent using techniques such as press brake bending or roll bending. These techniques apply pressure or force to the clad plate along a predetermined bend line, gradually forming it into the desired shape.

It is important to consult with experts or clad plate processing service providers who have experience and expertise in bending clad plates. They can provide guidance on the appropriate bending methods and ensure that the process is performed correctly, minimizing the risk of damage to the clad layers and maintaining the integrity of the bond.

[thesunshinereporter]

Plate beveling machine application on Petrochemical industry

http://dlvr.it/SzX5Sr

[machineriesinuae]

In the heart of the UAE, precision and efficiency meet in our pipe and plate beveling machines. Designed to elevate your metalworking, these advanced tools ensure you achieve the most accurate and clean beveled edges with ease.

Whether you're working in construction, fabrication, or any industry that relies on metal, our beveling machines are the solution to streamline your processes. They provide the precision required for joining pipes and plates seamlessly, resulting in superior-quality connections that meet industry standards.

With these machines at your disposal, you'll experience a significant reduction in manual labor, making your workflow more efficient and cost-effective. What used to take hours can now be accomplished in a fraction of the time, thanks to the automation and precision of our beveling machines.

The durability and reliability of our machines are second to none. They are built to withstand the toughest working conditions, ensuring longevity and consistent performance. In the UAE's challenging industrial environments, you can rely on these machines to deliver top-tier results every time.

Investing in our pipe and plate beveling machines means investing in the future of your metalworking projects. You'll benefit from increased productivity, cost savings, and the assurance that your beveled edges will consistently meet your exacting standards.

Whether you're in manufacturing, shipbuilding, or any field that relies on metal fabrication, our beveling machines are the key to unlocking efficiency and precision. Explore the possibilities in the UAE and take your metalworking to new heights with our advanced pipe and plate beveling machines

[promotechindiasworld]

Discover the hidden truth behind our latest launch The BM-30 WM provides professional results in weld shaving and milling.

[merakistar]

Petro-Canada Approved Flanges in UAE

Meraki Star Metals Oil & Gas Equipment Trading L.L.C. offers a wide selection of Inconel 601 Flanges, which are renowned for their exceptional properties like corrosion resistance, ease of installation, and fine finishing. Inconel 601 Slip-On Raised Spines (UNS N06601) are regularly utilized in brilliant cylinders, strand tempering cylinders, and steam superheater tube upholds, among different applications. Customers choose Inconel 601 Flanges because of their outstanding mechanical strength and resistance to aqueous corrosion.

Weld Neck Raised Flanges made of Inconel 601 are formed using all the usual methods. For most extreme oxidation opposition, Inconel 601 Visually impaired Ribs ought to be welded utilizing matching piece 601 amalgam GTAW wire. Even in extreme thermal cycling conditions, Inconel 601 Socket Weld Flanges develop a strongly adherent oxide scale that resists spalling. Thermal processing equipment like muffles, retorts, radiant tubes, flame shields, flare tips, woven wire conveyor belts, electrical resistance heating elements, and burner nozzles all make use of Inconel 601 Ring Type Joint Flanges.

Inconel 601 Blind Flanges are also used extensively in the power generation, aerospace, and pollution control industries, particularly in jet engine igniters. Inconel 601 Long Weld Neck Spines offer incredible assurance against carburization and are likewise impervious to carbon nitriding conditions. Inconel 601 Nipo Flanges have excellent creep rupture strength and metallurgical stability, making them highly resistant to carburization. These Inconel 601 Lap Joint Spines are likewise accessible in different sizes and shapes to meet assorted client needs.

Specification Format of Inconel 601 Blind Flange

Standards: GOST Flange, JISB2220, BS1560–3.1, API7S-15, API7S-43, API605, EN1092, BS, BS4504, BS 10, EN-1092, DIN, ANSI, ASME, DIN, MSS S44, ISO70051, ANSI/ASME B16.5, ASME/ANSI B16.5/16.36/16.47A/16.47B, B16.47 Series A & B, B16.48, EN

Pressure Rating: ANSI class 1500, Class 150, Class 900, Class 2500, Class 300, Class 600

Pressure Calculation in DIN: 10Bar, 16Bar, 25Bar, 40Bar, 6Bar, / PN16, PN64, PN40, PN25, PN10, PN6

JIS: 16 K, 20 K, 5K, 10 K, 40 K, 63 K, 30 K

UNI: 10Bar 16Bar 6Bar 25Bar 40Bar

EN: 6Bar 25Bar 40Bar 10Bar 16Bar

Most Common Types: Threaded / Screwed / Forged / Plate

Production technique: Forged, Heat treated and machined 

shapes and Types: we produce large Male-Female (LMF), Ring Type Joint (RTJ), Flat Face (FF), Small Tongue, Small Male-Female (SMF), Raised Face (RF), Large Tongue & Groove, Groove, Lap-Joint Face (LJF)

Test: Direct-reading Spectrograph, Magnetic particle detector, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector

Equipment: Pushing Machine, Press machine, Bending machine, Sand-blasting machine, electric bevelling machine, etc.

For More Information:

Visit Our Website:  https://www.merakimetals.ae

Contact No:  +971-523973687

E-Mail ID:  info@merakimetals.ae